Home / Sausage Belts

Sausage Belts

Sausage belts tooth profiles include T5, T9, T10 (Table 3-1), L (Table 3-2) and Custom Size (Table 3-3).

Sausage Belts are potential replacement belts for sausage feeders or sausage cutting machines such as Inotec Delinker, Ari Makina, Duker-Rex, Finova, Handtmann, Hitec, Signal-Pack, Vemag, Risco, Inox Meccanica, Seydelmann.

Sausage polyurethane synchronous belts usually consist of polyurethane body and aramid (kevlar) cord, while custom materials available upon request. Special cords include steel, stainless steel and carbon fiber.

Sausage PU timing belts are most commonly offered in widths of 32mm and 47mm, while custom sizes (lengths, widths and pitches) are available upon request.

T5, T9 & T10 (Table 3-1)

Part Number	Pitch [mm]	Length [mm]	Width [mm]	No of Teeth	Minimum Pulley Diameter [mm]	Fit for
32-T5-310	5	310	32	62	61
32-T5-330	5	330	32	66	61	Inotec Delinker
32-T5-350	5	350	32	70	61
32-T5-415	5	415	32	83	61
32-T5-420	5	420	32	84	61
32-T5-510	5	510	32	102	61
32-T5-525	5	525	32	105	61
32-T5-570	5	570	32	114	61
25-T5-575	5	575	25	115	61
32-T5-580	5	580	32	116	61
32-T5-625	5	625	32	125	61	Vemag
30-T5-650	5	650	30	130	61
25-T5-700	5	700	25	140	61
30-T5-720	5	720	30	144	61
32-T5-840	5	840	32	168	61	Inotec Delinker
32-T5-855	5	855	32	171	61
32-T5-910	5	910	32	182	61
32-T5-920	5	920	32	184	61
32-T5-1105	5	1105	32	221	61
32-T5-1140	5	1140	32	228	61
22-T9-279	9	279	22	31	83
32-T9-513	9	513	32	57	83	Inotec Delinker
32-T9-837	9	837	32	93	83	Inotec Delinker
47-T9-DL-1287	9	1287	47	143	83
32-T9-1350	9	1350	32	150	83
47-T9-DL-1350	9	1350	47	150	83
32-T10-370	10	370	32	37	84
32-T10-510	10	510	32	51	84
32-T10-570	10	570	32	57	84
35-T10-640	10	640	35	64	84
32-T10-840	10	840	32	84	84
32-T10-870	10	870	32	87	84
32-T10-930	10	930	32	93	84
35-T10-930	10	930	35	93	84

L (Table 3-2)

Part No1	Part No2	Length [inch]	Length [mm]	Pitch [inch]	Pitch [mm]	Width [inch]	Width [mm]	No. of Teeth
258L126	32-L-657.23	25.8	657.23	0.375"	9.525"	1.26	32	69
270L126	32-L-685.8	27	685.8	0.375"	9.525"	1.26	32	72
315L126	32-L-800.1	31.5	800.1	0.375"	9.525"	1.26	32	84

Custom Size (Table 3-3)

Part No1	Part No2	Pitch [mm]	Length [mm]	Width [mm]	No of Teeth
T5-895-38	38T5-895	5	895	38	179
T5-1450-25	25T5-1450	5	1450	25	290
T5-1645-25	25T5-1645	5	1645	25	329
T5-1750-32	32T5-1750	5	1750	32	350
T5-1775-25	25T5-1775	5	1775	25	355
T5-1860-32	32T5-1860	5	1860	32	372
T5-1880-32	32T5-1880	5	1880	32	376
T10-4710-25	25T10-4710	10	4710	25	471
T10-6300-25	25T10-6300	10	6300	25	630

Applications

– Meat Industry, belts for transporting sausages

Unique Characteristics

– Made of environmentally friendly materials
– Aramid kevlar or steel cord reinforcement
– Hardness: 80 Shore A
– Heat resistance on operating temperature 80 C (on short run up to 100 C Degrees)
– Good behavior at low temperature
– Very good resistance to hydrolysis
– Good resistance to abrasion
– Good resistance to oil, solvents, hydrocarbons
– Loadability is equal with normal PU timing belts