150L075 Capper Belts are potential replacement belts for Bottle Gripper and Cap Tightening such as Resina, Kaps-All, White Cap, Pack West, IMA, MAR, Surekap, National Instrument, Filamatic, New England Machinery (NEM), Pneumatic Scale, ELF, Inline Filling Systems, Accutek, E-Pak Machinery, Acasi Machinery, Newman, Kinsley, Kalish, CAPEM.
VFFS-Draw-Down-Belt-Vertical-Form-Fill-Seal-Machine-Belts
Haul Off Belts Wire Feeder Cable Pulling Caterpillar Tractor Belts
Capper Belts consist of several components. They include fiberglass tensile cord, nylon tooth facing, neoprene body and backing. More specifically, Retorquer Belts are protected by neoprene body and backing. The toothed surface is protected by high wear resistant nylon elastic fabric. Fiberglass provides good flex life.
Specifications
Part No | 150L075 | Length | 15″ |
Width | 3/4″ | Number of Teeth | 40 |
Pitch | 3/8″ | Covering Thickness | 1/4″, 3/8″, 2, 3, 4, 5, 6, 6.3, 7, 8, 9.5 mm or custom sizes |
Tooth Profile | L | Covering Materials | Neoprene | PU | Silicone |
Body Material | Neoprene | PU | Belt Type | Endless |
Tensile Cord | Fiberglass, Steel or Kevlar | Operating Temp C | -30 Degrees ~ +90 Degrees C |
Tooth Facing | Nylon | Operating Temp F | -22 Degrees ~ +194 Degrees F |
Coatings & Coverings | Red, White, Gray | Custom Colors | Special Requirements | Grooves, Slots & Tooth Removal |
OEM | Fit for |
Note: Custom widths, sizes & materials available upon request