Generic filters

P-5100 Endless Flat Belts

P-5100 seamless flat belts are potential replacement belts for Textile, Banking, Materials Handling, Office Equipment, Imaging, Postal, Fiber Optics. Seamless flat belts are applied to Power Transmission, Document Transport, PC Board Conveyor, Light Weight Tube Winders, High Speed Power Transmission, Currency Transport, Drum Drive, Yarn Twister and Spinning Frame. Endless flat belts can be slit and supplied to your exact dimension or can be further fabricated with holes, covers and machined modifications.

Endless flat belt substrates include polyurethane(PU), silicone, rubber and neoprene. Tensile reinforcement options include polyester, aramid Kevlar, cotton, nylon, steel and fiberglass. The construction of the belt is influenced by the application.



ZZR ModelZP-5100Interchange Belt Code for BGKP-5100
Thickness [mm]0.9 ~ 10Minimum Pulley Diameter [mm]8
Tensile Force [N/cm]220Tensile Force at 1% Elongation [N/cm]
Tensile ElementNo FabricCoating & HardnessPU 45~95
Anti-StaticNoOperating Temp C-20 ~ +80 Degrees C
Surface ColorBlack, Yellow, Grey, White, Red, BlueConveying Side SurfaceSmooth | Rough
Belt TypeSeamless | EndlessPulley Side SurfaceRough
ProcessDipped and Cured Woven EndlessIndustrial ApplicationsElastic drive and conveyor belt without fabric reinforcement, suitable for fixed shaft centre distances, e.g. for dynamic check weighing units.
Coating material for timing belts.

(Note : Custom sizes, colors & materials available upon request)

[print_posts pdf="no" word="no" print="yes"]