Vertical Form Fill and Seal Belts are designed for TNA 2930-6.
Draw Down Belts consist of several components. They include fiberglass tensile cord, nylon tooth facing, neoprene body and backing. More specifically, Pull Down Belts are protected by neoprene body and backing. The toothed surface is protected by high wear resistant nylon elastic fabric. Fiberglass provides good flex life.
|Width||0.5″||Number of Teeth||98|
|Pitch||0.375″||Covering Thickness||4.5, 6mm|
|Tooth Profile||L||Covering Materials||Neoprene | Custom Materials|
|Body Material||Neoprene | PU||Belt Type||Endless|
|Tensile Cord||Fiberglass | Kevlar||Operating Temp C||-30 Degrees ~ +90 Degrees C|
|Tooth Facing||Nylon||Operating Temp F||-22 Degrees ~ +194 Degrees F|
|Coatings & Coverings||Red, Blue, Yellow | Custom Colors||Special Requirements||Slots, Grooves, Holes & Tooth Removal|
Note: Custom widths, sizes & materials available upon request