T4H/35 Power Transmission Flat Belts

T4H/35 ( GG-28, TFM-15S, TFL-18S ) flat belts are replacement belts for Habasit, Siegling and Nitta. Power Transmission Tangential Flat Belts consist of three components. They include friction cover, traction layer and reverse cover.
Polyamide traction layer is well known for its reliability and long belt life. Robust and highly resilient, copes with intermittent overload and high temperatures. Proven XNBR Rubber cover with high abrasion resistance.



ModelT4H/35Interchange Belt CodeGG-28, TFM-15S, TFL-18S
Thickness [mm]3.5Width [mm]10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80 mm | Custom Sizes
Tensile Force [N/mm]17.5Width [inch]1/4, 5/16, 3/8, 1/2, 3/4, 1-1/2, 0.25, 0.31, 0.37, 0.50, 0.75, 1, 1.5, 2, 3, 4 inch | Custom Sizes
Mass Weight [kg/sqm]4.1Nominal Peripheral Force [N/mm]43.5
Antistatically EquippedYesTraction Layer [Material]Polyamide [PA]
Opposite Side MaterialXNBR RubberPulley Side MaterialXNBR Rubber
Opposite Side SurfaceRough [Fine Upon Request]Pulley Side SurfaceRough [Fine Upon Request]
Opposite Side ColorGreenPulley Side ColorYellow
Joining SystemThermofixOperating Temp C-20 Degrees ~ +100 Degrees C
Drive DeterminationDouble-Sided & Tangential DrivesOperating Temp F-4 Degrees ~ +212 Degrees F
Industrial Applications-Textile industry
[cards, draw frames, roving frames, ring spinning frames, OE machines, twisting machines, texturing machines, winders, overhead cleaners]
-Paper and postal industry
[calenders, paper mills, pulpers, slitters, web feeders, folders, finishing machines, converting lines, letter sorters]

(Note : Custom sizes, colors & materials available upon request)