Synchronous belt which is industrial belt initially entered China in the 60’s, and at that time it is mainly applied in advanced equipment imported from abroad, also is restricted in manufacturing industry era background at that time.Since then, there has been a demand for synchronous belt replacement, so domestic enterprises began to try to manufacture synchronous belts in the middle of the 1960s.At that time, At that time, the products were mainly imitated from abroad, and the output could only be produced in small batches.However, since the 1980s, a few domestic manufacturers have begun to introduce some advanced production and testing equipment from abroad to try to produce trimmed V-belts and polyurethane timing belts, and the sales are very good.With the rapid development of synchronous belt production, it is urgent to standardize the synchronous belt and pulley.
In the mid-1970s, the Shanghai Institute of Mechanical Engineering independently developed a series of standards for the modular system of trapezoidal tooth synchronous belts. The national standard formulated on the basis of the ISO synchronous belt drive standard was approved in 1984, published in 1989, and implemented in 1990.Then from this time, the industrial belt products such as polyurethane synchronous belt and rubber synchronous belt have been standardized production. These two industrial belts have practically contributed to the rapid development of the industrial manufacturing industry in China.
Polyurethane PU Synchronous Belts is made of imported thermoplastic polyurethane material, which has high anti-wear ability. Various types of steel wire cores ensure that they still maintain a good movement ability in the transmission, and the production tolerance is small.Polyurethane synchronous belts are generally made of nylon wire (or steel wire, copper wire) as the tensile body, and polyester is cast. It has the characteristics of oil resistance, impact resistance and beautiful appearance.It is a thermoplastic polyurethane material with high modulus, high strength, high elasticity, small deformation, good bending, excellent wear resistance, oil resistance, low temperature resistance, aging resistance, and it can meet medical and health requirements.The wear resistance of polyurethane synchronous belt is 8 times that of rubber synchronous belt.It is more suitable for food, medical industry and clean production industry than rubber synchronous belt.
In recent years, polyurethane (PU) synchronous belt has gradually replaced rubber synchronous belt.Polyurethane timing belts are widely used in computerized embroidery machines, beverage machinery and colored glass manufacturing industries. The skeleton material used is aramid thread rope and non-embroidered steel wire rope.
With the continuous development of science and technology, the quality of the synchronous belt will be more and more excellent.ZZR has been unswervingly following the pace of scientific and technological development, constantly improving and innovating existing products, and striving to make customers get industrial belt products with better leather quality and more in line with their machinery and equipment.
ZZR BELTS is a leading global manufacturer of high-performance belts such as rubber timing belts, polyurethane timing belts, v belts and other belts. Plenty of ready stock for up to 30,000 different SKUs. Applications include power transmission, conveying, driving, indexing, linear drive and others. Industries include machine engineering, agricultural engineering, automotive industry, household industry and others. If you need to find a belt with guaranteed quality, then please log on to ZZR BELTS’s official website https://www.zzr-parts.com, there are a variety of performance belts for you to choose from. At the same time can be customized
Synchronous belt which is industrial belt initially entered China in the 60’s, and at that time it is mainly applied in advanced equipment imported from abroad, also is restricted in manufacturing industry era background at that time.Since then, there has been a demand for synchronous belt replacement, so domestic enterprises began to try to manufacture synchronous belts in the middle of the 1960s.At that time, At that time, the products were mainly imitated from abroad, and the output could only be produced in small batches.However, since the 1980s, a few domestic manufacturers have begun to introduce some advanced production and testing equipment from abroad to try to produce trimmed V-belts and polyurethane timing belts, and the sales are very good.With the rapid development of synchronous belt production, it is urgent to standardize the synchronous belt and pulley.
In the mid-1970s, the Shanghai Institute of Mechanical Engineering independently developed a series of standards for the modular system of trapezoidal tooth synchronous belts. The national standard formulated on the basis of the ISO synchronous belt drive standard was approved in 1984, published in 1989, and implemented in 1990.Then from this time, the industrial belt products such as polyurethane synchronous belt and rubber synchronous belt have been standardized production. These two industrial belts have practically contributed to the rapid development of the industrial manufacturing industry in China.
Polyurethane PU Synchronous Belts is made of imported thermoplastic polyurethane material, which has high anti-wear ability. Various types of steel wire cores ensure that they still maintain a good movement ability in the transmission, and the production tolerance is small.Polyurethane synchronous belts are generally made of nylon wire (or steel wire, copper wire) as the tensile body, and polyester is cast. It has the characteristics of oil resistance, impact resistance and beautiful appearance.It is a thermoplastic polyurethane material with high modulus, high strength, high elasticity, small deformation, good bending, excellent wear resistance, oil resistance, low temperature resistance, aging resistance, and it can meet medical and health requirements.The wear resistance of polyurethane synchronous belt is 8 times that of rubber synchronous belt.It is more suitable for food, medical industry and clean production industry than rubber synchronous belt.
In recent years, polyurethane (PU) synchronous belt has gradually replaced rubber synchronous belt.Polyurethane timing belts are widely used in computerized embroidery machines, beverage machinery and colored glass manufacturing industries. The skeleton material used is aramid thread rope and non-embroidered steel wire rope.
With the continuous development of science and technology, the quality of the synchronous belt will be more and more excellent.ZZR has been unswervingly following the pace of scientific and technological development, constantly improving and innovating existing products, and striving to make customers get industrial belt products with better leather quality and more in line with their machinery and equipment.
ZZR BELTS is a leading global manufacturer of high-performance belts such as rubber timing belts, polyurethane timing belts, v belts and other belts. Plenty of ready stock for up to 30,000 different SKUs. Applications include power transmission, conveying, driving, indexing, linear drive and others. Industries include machine engineering, agricultural engineering, automotive industry, household industry and others. If you need to find a belt with guaranteed quality, then please log on to ZZR BELTS’s official website https://www.zzr-parts.com, there are a variety of performance belts for you to choose from. At the same time can be customized
